Monsterlabo is Runned Updated version of his signature, beast. Bit-Tech announced a rather recent beast, back In MarchWhen it was equipped with AMD Ryzen 3800X and NVIDIA GEFORCE RTX 3080, and demonstrated how he launched the Microsoft Flight Simulator 2020. With passive cooling, playing a 1440P game on the UW display, the weight system has saved the processor on a stable 75 ° C and the total Conventional GPU at 65 ° C.
Now Monsterlabo has released an “updated design”, which, as they say, meets the expanded assortment of video cards and provides additional options for exclusive Indiegogo settings, as well as pre -created machines. As in the previous version of the beast, the new model is based on the heart (in fact, now this is a heart2) for passive magic. This passive cooling mass takes about half of the chassis and is divided between the front section and the back – one looks after the processor, and the other – a graphic processor.
I checked the characteristics of the heart2And, in the visible, this is the same in terms of subcontuition and cooling possibilities, so I am not sure of the changes that bring him the second title. Specifications can be found below:
- 2 -Cremultic giant radiators (3 kg each) passively cooling electronics,
- 20x 6 mm thermal pipes, 10x for each chip. Damn, yes, we know, not bad for PC!
- 6x copper heat drains connecting radiators to the aluminum and rear panel 6 mm wide to enhance thermal distribution.
I think that one of the later improvements provided by the beasts is cooperation with EKWB on Thetspreaders; For memory and for graphic processors with TDP> 220W.
Optimal technology recently Built the system Based on the latest version of the beast, adjusting the Intel i9-10900K (for calling), operating at 89 ° C at 4.5 GHz and 1.13 V for all 10 nuclei, while the RTX 3080 graphic processor was filled with AFTERBURNER to run a stable slope of 80 ° C under the load with a small-out-out-of-the 150-200 mm.
To make the assembly completely silent, the optimal technology used PSU Silverstone Nightjar. He also recommends a motherboard with VRM “Revaluation of VRM” with decent radiators to heat, such as VRMS.
One of the new aspects of this campaign of Indiegogo is the offer of user color decoration. When you decide to support the project, you can choose an addition to the user color. “We will take care of the picture,” says Monsterlabo, in this crowdfunding exclusive service. In addition, he adds an option of the user engraving of the logo, in addition to the standard module number and an engraving of serial number that you will see around the rear.
Pre -built beast models from 2850 euros
And the last, but no less important that Monsterlabo has several pre -created options along the route of additional services (starting with 2850 euros), or will even make an assembly for you from the supplied components with some “optimization without fans” used by their technical people.
You can support the beast and should expect to receive the chassis for Christmas (1 remained at the time of writing) for 790 euros. If you miss this, the next party has been aimed at Easter release (delivery of April 2022) since 197 remaining. You will also have to wait for Easter while the “beast is a brass edition”, I hope this is not tarnished.
