A firewood cutter, also known as a lumber conveyor, is an exceptional tool if you want to sell and cut firewood. My winter car.
This item cannot be used alone, you will need a tractor for this. However, this is easier said than done, and this guide will help you become a lumberjack in a few simple steps.
How to use a lumber conveyor in my winter car
The first task is to connect the Cutter to Kekmet. It is not possible to move a lumber conveyor from a stationary position without attaching it to the tractor. Therefore, drive the tractor carefully and place it as close to the conveyor as possible. Keep the distance as small as possible, otherwise the alignment will be disrupted and the logs will fall.
You will find the rear hitch lever on the right side of the Kekmet. Use it to lower the implement arms from the rear of the tractor. Go down and click the connection point on the cutter (after the attachment arms are lowered). When properly aligned, the cutter will connect to the Kekmet.
Next, use the PTO lever located to the left of the Kekmet steering wheel. Activate it to start the drive shaft and conveyor. If you want the cutter to run quickly, select a higher rotation speed. However, this will be less favorable for a longer cutting session.
How to prepare firewood in my winter car
After completing all the steps mentioned earlier in the guide, take the log from the wood pile. Then place it in the cutter slot. The magazine will automatically split the magazines into parts depending on how high the rpm is. The conveyor will automatically place the Firewood into the trailer (don't forget to attach it).
